selbstpresscontainer.png

Compactors

Quality marks

  1. Safety lock with threaded ratchet for safety door opening
  2. control panels safely installed
  3. robust electrics
  4. oil level indicator
  • option lid seal all around / rear flap waterproof / seal maintenance door to avoid odour
  • hydraulic cylinder with pivot bearings
  • oil deficiency switch
  • compact unit (no hose pipes of valve-pump connection)
  • lid lockable
  • transformer control (no zero conductor necessary)
  • bottom (header) made of wear-resistant steel 450 HBW
  • convex side panels
  • wiper at drawer made of PE, dynamically supported
  • gas springs for led
  • modular system (for easy spare parts handling)

 

It’s heavy duty construction the most striking advantage of a BERINGER reducer.

Header and ram plate are welded constructions made of hollow sections and UPN-IPN beams. The body is made of convex sheets to achieve highest stability at lowest empty weight. The convex body construction ensures perfect emptying. The silent hydraulic unit is installed safely in the header. It is installed on silent blocks, the oil drainage is installed on the outside, and the oil indicator can be seen from outside. Generally our power units are equipped with an oil-deficiency switch and switch off automatically in case of oil leakage.

 

Operating principle

Compactors reducer x4

Reducer x4

Mobile compactor for chain-loader systems according to DIN 30 730

Smoothline construction, conical shape;

With silence pump;

Feed opening 835 x 1500 mm;

SPS control;

With radial sheets (left & right);

Primed and coated in RAL colour of your choice;

 

Standard equipment

Lid installed front sides

80 % Fill level signal

 

 

Technical Data

 

Actuating power:                 5,5 kW

Fuse protection:                  16 A delay

Power supply:                      400 V / 50 Hz.

Hopper height:                    1650 mm

Upper feed opening:          1200 x 1500 mm

Lower feed opening:          835 x 1500 mm

Ram capacity / stroke:        1,25 cbm

Plunger stroke:                    1130 mm

Retraction depth:                280 mm

Compaction force:              280 kN / m²

Cycle time:                           33 sec.

Hydraulic oil:                       35 ltrs.

Control voltage:                   230 V

Compactors reducer x4-ergo

Reducer x4

Mobile compactor for chain-loader systems according to DIN 30 730

Smoothline construction, conical shape;

With silence pump;

Feed opening 835 x 1500 mm;

SPS control;

With radial sheets (left & right);

Primed and coated in RAL colour of your choice;

 

Standard equipment

Lid installed front sides

80 % Fill level signal

 

Technical Data

Actuating power:                 5,5 kW

Fuse protection:                  16 A delay

Power supply:                      400 V / 50 Hz.

Hopper height:                    1650 mm

Upper feed opening:          1200 x 1500 mm

Lower feed opening:          835 x 1500 mm

Ram capacity / stroke:        1,25 cbm

Plunger stroke:                    1130 mm

Retraction depth:                280 mm

Compaction force:              280 kN / m²

Cycle time:                           33 sec.

Hydraulic oil:                       35 ltrs.

Control voltage:                   230 V

Quality marks

Quality marks

 

1.         Safety lock with threaded ratchet for safety door opening

2.         control panels safely installed

3.         robust electrics

4.         oil level indicator

 

-           option lid seal all around / rear flap waterproof / seal maintenance door to avoid odour

-           hydraulic cylinder with pivot bearings

-           oil deficiency switch

-           compact unit (no hose pipes of valve-pump connection)

-           lid lockable

-           transformer control (no zero conductor necessary)

-           bottom (header) made of wear-resistant steel 450 HBW

-           convex side panels

-           wiper at drawer made of PE, dynamically supported

-           gas springs for led

-           modular system (for easy spare parts handling)

 

It’s heavy duty construction the most striking advantage of a BERINGER reducer.

Header and ram plate are welded constructions made of hollow sections and UPN-IPN beams. The body is made of convex sheets to achieve highest stability at lowest empty weight. The convex body construction ensures perfect emptying. The silent hydraulic unit is installed safely in the header. It is installed on silent blocks, the oil drainage is installed on the outside, and the oil indicator can be seen from outside. Generally our power units are equipped with an oil-deficiency switch and switch off automatically in case of oil leakage.

 

 

Fill safely - avoid accidents

Put lid in upright position for easy filling
gas springs are installed insides

filling height is 1310 mm.
 

 

Compactors Pendulum Compactor x4

Mobile compactor for chain loader systems,

Smoothline construction, conical shape,

Control panels safely installed on left and right side,

“wet waste” fully liquid proof,

Header and body welded in one piece,

Feed opening 1400 x 1000 mm,

the compactor is especially designed for compacting of waste with high liquid quote (e.g. kitchen waste, fruits and vegetables)

Primed and coated in RAL colour of your choice.

 

Standard equipment:

- lid installed front sides

- automatic phase inverter relay

- cleanout door liquid proof

- 80 % fill level signal

Technical Data

Actuating power:                 5,5 kW

Fuse protection:                  16 A delay

Power supply:                      400 V / 50 Hz.

Hopper height:                    1480 mm

Feed opening:                     1400 x 1000 mm

Plunger stroke:                    1130 mm

Compaction force:              280 kN / m²

Quality marks

  1. Safety lock with threaded rachet for easy opening even under pressure
  2. Control panels safely installed on both sides
  3. Robust electrics
  4. Oil level indicator
  • oil deficiency switch
  • self-cleaning
  • entire container made of S 460 MC
  • lid above feed opening gas-spring loaded 

Compactors reducer x5

Compactor for hook-lift systems manufactured according to DIN 30 730

Smoothline construction conical shape;

With silent pump

Feed opening 1000 x 18600 mm in front of plunger;

SPS control

With radial sheets (left & right)

Primed and coated in RAL colour of your choice

 

Standard equipment:

Lid installed front sides

Pick-up system in the rear with 2 rollers front sides;

Pick up system fold down and hinged at front side;

With paper rack;

With steel wiper in front of ram plate;

80 % fill level signal

Quality marks

1.         safety lock at cleanout door

2.         control panel – safely installed

3.         hook at backside for maneuvering purpose

4.         foldable hook at front side for transport purpose

5.         robust electrics

6.         paper rack

 

-           oil-level indicator (outside) with drainage cock

-           option lid seal all around / rear flap waterproof / seal maintenance door to avoid odour

-           hydraulic cylinder with pivot bearings

-           oil deficiency switch

-           compact unit (no hose pipes of valve-pump connection)

-           lid lockable

-           transformer control (no zero conductor necessary)

-           bottom (header) made of wear-resistant steel 450 HBW

-           wiper at drawer made of PE dynamically supported

-           gas springs for led

-           modular system (for easy spare parts handling)

Compactors reducer x6-520

Compactor for hook-lift systems according to DIN 30 730

Smoothline construction conical shape;

With silent pump

Feed opening 1480 x 2090 mm in front of plunger;

Feed opening: 1000 x 1860 mm

SPS control;

With radial sheets (left & right);

Primed and coated in RAL colour of your choice

 

Standard equipment:

Pick-up system in the rear with 2 rollers frontsides;

Pick up system fold down and hinged at front side;

With paper rack;

With steel wiper in front of ram plate;

80 % fill level signal

Quality marks

 

1.         safety lock at cleanout door

2.         control panel – safely installed

3.         hook at backside for maneuvering purpose

4.         foldable hook at front side for transport purpose

5.         robust electrics

6.         paper rack

 

 

-           oil-level indicator (outside) with drainage cock

-           option lid seal all around / rear flap waterproof / seal maintenance door to avoid odour

-           hydraulic cylinder with pivot bearings

-           oil deficiency switch

-           compact unit (no hose pipes of valve-pump connection)

-           lid lockable

-           transformer control (no zero conductor necessary)

-           bottom (header) made of wear-resistant steel 450 HBW

-           wiper at drawer made of PE dynamically supported

-           gas springs for led

-           modular system (for easy spare parts handling)

Compactors Pendulum Compactor x6

Mobile compactor for hook-lift systems,

Smoothline construction, conical shape,

Control panels safely installed on left and right side,

“wet waste” fully liquid proof,

Header and body welded in one piece,

Feed opening 1400 x 1830 mm,

the compactor is especially designed for compacting of waste with high liquid quote (e.g. kitchen waste, fruits and vegetables)

suitable for BERINGER mobile bin lifter

Primed and coated in RAL colour of your choice.

 

Standard equipment:

- lid installed front sides

- automatic phase inverter relay

- cleanout door liquid proof

- 80 % fill level signal

Pendulum Compactor x6 20 cbm

Quality marks

  1. Safety lock with threaded rachet for easy opening even under pressure
  2. Control panels safely installed on both sides
  3. Robust electrics
  4. Oil level indicator
  • oil deficiency switch
  • self-cleaning
  • entire container made of S 460 MC
  • lid above feed opening gas-spring loaded 

Compactors Compactor for bulky waste

Compactor (bulky waste specs. for hook-lift systems according to DIN 30 730

Smoothline construction conical shape;

With silent pump,

Header with special reinforcements,

Additional rib,

First sidewall plate (left & right) and first bottom plate made of wear resistant steel 450 HBW,

Feed opening 1810 x 2090 mm in front of plunger;

SPS control;

With radial sheets (left & right);

Primed and coated in RAL colour of your choice

Standard equipment:

Pick-up system in the rear with 2 rollers front sides;

Pick up system fold down and hinged at front side;

With paper rack;

With steel wiper in front of ram plate;

80 % fill level signal

Quality marks

1.         safety lock at cleanout door

2.         control panel – safely installed

3.         hook at backside for maneuvering purpose

4.         foldable hook at front side for transport purpose

5.         robust electrics

6.         paper rack

 

-           oil-level indicator (outside) with drainage cock

-           option lid seal all around / rear flap waterproof / seal maintenance door to

            avoid odour

-           hydraulic cylinder with pivot bearings

-           oil deficiency switch

-           compact unit (no hose pipes of valve-pump connection)

 

-           lid lockable

-           transformer control (no zero conductor necessary)

-           bottom (header) made of wear-resistant steel 450 HBW

-           wiper at drawer made of PE dynamically supported

-           gas springs for led

-           modular system (for easy spare parts handling)

Compactors reducer x4 with integrated bin lifter

BERINGER – integrated bin lifter

Suitable for any type of reducer x4
The hydraulic unit of integrated bin lifter is supplied from compactors power unit. The compction cycle is not interrupted by operating the bin lifter.

Our standard integrated bin lifter are suitable for bins 80 l up to 110 l. The integrated bin lifter is suitable for trunnions or comb bar.
Of cause we also offer customized solutions for bigger bins.

BERINGER reducer x4 / 10 cbm with integrated bin lifter
BERINGER reducer x4 / 10 cbm with integrated bin lifter and lid opener additional
BERINGER reducer x4 / 6 cbm with customized bin lifter for 1000 l bins with foldable arms
BERINGER reducer x4 / 6 cbm with customized bin lifter

Compactprs reducer x5, x6, x6-520 with integrated bin lifter

BERINGER – integrated bin lifter

Suitable for any type of reducer x5 and x6
The hydraulic unit of integrated bin lifter is supplied from compactors power unit. The compction cycle is not interrupted by operating the bin lifter.

Our standard integrated bin lifter are suitable for bins 80 l up to 110 l. The integrated bin lifter is suitable for trunnions or comb bar.
Of cause we also offer customized solutions for bigger bins.

BERINGER reducer x5 / 20 cbm with integrated bin lifter for 1100 l DIN-bins
BERINGER reducer x5 / 22 cbm with integrated bin lifter
BERINGER reducer x6-520 with integrated bin lifter
BERINGER reducer x6-520 / 20 cbm with integrated bin lifter 1100 l DIN-bins.

Compactors Additionals

Each BERINGER reducer is equipped with a lot of standard equippment.- in the following we would like to show you what is possible to customize your compactor for your needs:

 

 

 

  1. Lid divided longsides gas-spring loaded
  2. Lid installed frontsides gas spring loaded
  3. Rubber seal at lid and maintenace door; waterproof specs.
  4. Customized solution for x4-ergo lid divided longsides gas spring loaded
  • Rubber seal for door or rear flap (height 500 mm)
  • Rubber seal for door or rear flap (height 1000 mm)
  • High level sidewall (each side) above hopper up to 1800 FFL
  • High level sidewall, srcewed (each side)
  • Double wing door at front side
  • Door at sidewall
  • Roof above  feed opening, doors in sidewall or front side (hospital spec.) without rubber seal
  • Electrical protection of doors or feed opening
  • Rubber seal for hopper (all around)

Remote Control, hooks and rollers

1. Remote control with 3 m cable (different cable lengthes available)

 Functions remote control

  • key switch
  • Emergeny stop
  • Emergency rescue
  • ON
  • Light dysfunction
  • Light 80% fill level
  1. Hook at backside for manoevering purpose
  2. Set of rollers (polyamide)
  3. Optional chain bolts
  4. Foldable hook at front side for transport purpose
  5. Buffer for ramps

Control Panel

11. control panel

12 paper racks
 

Lid options

different lid options for filling from ramp or ground

 

 

Compactor with mobile bin lifter

with Hydro-power unit, customized for bins from 80 up to 1100 l (excemption: 660 l min. bolt height: 970 mm) or customized for individual bins.

mobile bin lifter for bins 1100 ltrs according to DIN
mobile bin lifter with trunnions and comb bar for bins 80 ltrs up tp 1100 ltrs
mobile bin lifter with trunnions and comb bar for bins 80 ltrs up to 1100 ltrs